No. 178/1/1, Horana road, Wakada, Panadura, Sri Lanka

    +94 773 965 433

  • Home

Products

Back to: Products


INQUIRY

Sliding Doors

Discription

This series for windows and doors permits the fabrication of classic, sliding shutter elements and also frames including both underneath and overhead lights blending perfectly with the profiles from the 56 IW series. The closing device of the sliding shutters uses an exclusive multipoint lock taken from the same Cremone handle used in the casements to assure the product maximum security and eliability.

The classic design of the sliding element is accentuated by glass beads cut at a 45° angle just like the sliding frames. This series is also available in a new external frame made with a 45° cut that guarantees a practical and rapid assembly of the sliding components.

Our Related Projects

Technical Features

Raw materials

  • Extruded sections in alloy primarily aluminum EN AW-6060 (UNI EN 755-2) T5
  • Gaskets/static and dynamics in EPDM compound

Profile

  • Depth of the outer frame 95 mm (91 mm K224 frame at 45°)
  • Depth of the sliding shutters 36 mm (that can also hold glass with a thickness of 6-24 mm)
  • Range of normal frames (not thermally insulated) for the fabrication of sliding doors and windows.

The new profile that reinforces the central interlock in a railed synergistic form with the large series allows the assembly of doors and windows with large surfaces and exposed areas with high capacity loads.

Accessories

All of the accessories are made by Stylish windows and are produced with high quality materials. The mortised handle has been given a security device to block the closing hooks and the trolleys are adjustable with a metal die cast body that permits a capacity load of 150kg per shutter.

Glazing

The profile allows the installation of glass from 6-24 mm in thickness. The glass is held into place by glass beads with internal and external gaskets.

Possible manufacturing solutions

Windows and doors from 1-6 sliding shutters, frames made with an overhead light, underneath light and adjustable or fixed side lights. The profile for the outer frame can be made traditionally with a bottom rail side mullion and a horizontal top rail or with a single profile cut at an angle of 45°.